Italiano English


ABS-M30 is up to 25-70 percent stronger than standard Stratasys ABS and is an ideal material for coneptual modeling, functional prototyping, manufacturing tools, and end-use-parts. ABS-M30 has greater tensile, impact, and flexural strength than standard ABS, for a more durable part. This results in more realistic functional tests and higher quality parts for end use.

Mechanical Properties 1 Test Method English Metric
Tensile Strength (Type 1, 0.125", 0.2"/min) ASTM D638 5,200 psi 36 MPa
Tensile Modulus (Type 1, 0.125", 0.2"/min) ASTM D638 350,000 psi 2,400 MPa
Tensile Elongation (Type 1, 0.125", 0.2"/min) ASTM D638 4% 4%
Flexural Strength (Method 1, 0.05"/min) ASTM D790 8,800 psi 61 MPa
Flexural Modulus (Method 1, 0.05"/min) ASTM D790 336,000 psi 2,300 MPa
IZOD Impact, notched, (Method A, 23°C) ASTM D256 2.6 ft-lb/in 139 J/m
IZOD Impact, notched, (Method A, 23°C) ASTM D256 5.3 ft-lb/in 283 J/m

Thermal Properties 2 Test Method English Metric
Heat Deflection (HDT) @ 66 psi, 0.125 unannealed ASTM D648 204°F 96°C
Heat Deflection (HDT) @ 264 psi, 0.125 unannealed ASTM D648 180°F 82°C
Vicat Softening Temperature (Rate B/50) ASTM D1525 210°F 99°C
Glass Transition (Tg) DMA (SSYS) 226° F 108°C
Coefficient of Thermal Expansion (flow) ASTM E831 4.9E-05 in/in/°F 8.82E-05 mm/mm/°C
Coefficient of Thermal Expansion (xflow) ASTM E831 4.7E-05 in/in/°F 8.46E-05 mm/mm/°C
Melt Point - - - - - - - - - Not Applicable 3 Not Applicable 3/sup>

Electrical Properties 4 Test Method Value Range
Volume Resistivity ASTM D257 4.0x10e14 - 5.0x10e13 ohms
Dielectric Constant ASTM D150-98 2.9 - 2.7
Dissipation Factor ASTM D150-98 .0052 - .0049
Dielectric Strength ASTM D149-09, Method A 370 - 71 V/mm

Other 2 Test Method Value
Specific Gravity ASTM D792 1.04
Flame Classification UL94 HB (0.09"/ 2.50 mm)
Rockwell Hardness ASTM D785 109.5
UL File Number - - - - - - - - - E345258

1 Build orientation is on side long edge.
2 Literature value unless otherwise noted.
3 Due to amorphous nature, material does not display a melting point.
4 All Electrical Property values were generated from the average of test plaques built with default part density (solid). Test plaques were 4.0 x 4.0 x 0.1 inches (102 x 102 x 2.5 mm) and were built both in the flat and vertical orientation. The range of values is mostly the result of the difference in properties of test plaques built in the flat vs. vertical orientation.